Scan Tool Data Definitions
- Accessory 1
-
Input from ignition switch ACCESSORY circuit. Used to determine power mode. Hot in ACCESSORY and RUN.
- Door Jamb Switch
-
Input showing state of the passenger doors.
- Driver Door Switch
-
Input from the driver door indicating door status.
- Ignition 0
-
Input to the control module from the ignition switch indicating the Ignition 0 position. Switch closed (HOT) in ignition switch positions Unlock, Accessory, Run, Crank.
- Ignition 1
-
Input to the control module from the ignition switch indicating the Ignition 1 position. Switch closed (HOT) in ignition switch positions Run, Crank.
- RAP Output
-
Output indicates state that the control module has commanded.
- Trunk Ajar Switch
-
Indicates state of switch used to control lamp in trunk and IPC indicator.