Installation Procedure

Fig 1: View Of Seat Belt Retractor At Lower Center Pillar

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the seat belt retractor bolt.
Tighten: Tighten the seat belt retractor bolt to 68 N.m (50 lb ft).

Fig 2: Identifying Seat Belt Anchor Plate Nut

Courtesy of GENERAL MOTORS CORP.

Position the anchor plate to the seat stud.
Install the anchor plate nut to the seat stud.
Tighten: Tighten the anchor plate nut to 42 N.m (31 lb ft).

Fig 3: Locating Intermediate Guide Bolts

Courtesy of GENERAL MOTORS CORP.

Install the intermediate guide bolts.
Tighten: Tighten the intermediate guide bolts to 10 N.m (89 lb in).
Install the lower center pillar trim. Refer to Trim Panel Replacement - Lower Center Pillar in Interior Trim.

Fig 4: View Of Seat Belt Guide Loop

Courtesy of GENERAL MOTORS CORP.

Position the guide loop to the guide adjuster bracket.
Install the guide loop nut.
Tighten: Tighten the guide loop nut to 42 N.m (31 lb ft).
Close the guide loop cover.