LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2004 >> Regal GS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls 3.8L (Introduction, Service & Replacement) >> Repair Instructions >> Boost Control Solenoid Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L36) or Fuel Injector Sight Shield Replacement (L67) in Engine Mechanical - 3.8L.
  2. Fig 1: View Of Boost Control Solenoid
    GM66407Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the boost source and signal hoses from the boost control solenoid (2).
  4. Disconnect the boost control solenoid electrical connector.
  5. Remove the boost control solenoid nut.
  6. Remove the boost control solenoid (2).