LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2004 >> Regal GS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls 3.8L (Introduction, Service & Replacement) >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Valve Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying EGR Valve & Components
    GM12312Courtesy of GENERAL MOTORS CORP.
  1. Install a new EGR valve gasket (2).
  2. Install the EGR valve (1).
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the EGR valve nuts (4).

    Tighten:  Tighten the nuts to 30 N.m (22 lb ft).

  5. Connect the EGR valve electrical connector.