LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2004 >> Regal GS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls 3.8L (Introduction, Service & Replacement) >> Repair Instructions >> Mass Air Flow (MAF) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of MAF Sensor
    GM378168Courtesy of GENERAL MOTORS CORP.
  1. Install the MAF sensor (1).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the MAF sensor screws (9).

    Tighten:  Tighten the screws to 3 N.m (27 lb in).

  3. Connect the MAF sensor electrical connector (8).
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L36) or Fuel Injector Sight Shield Replacement (L67) in Engine Mechanical - 3.8L.
scientia non olet · About LEMON Manuals