Installation Procedure

Fig 1: Fuel Filler Pipe

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the fuel tank filler pipe screw to the under body.
Tighten: Tighten the screw to 13 N.m (115 lb in).

Fig 2: Identifying Fuel Tank Components

Courtesy of GENERAL MOTORS CORP.

Install the filler hose (4) to the fuel fill pipe (2).
Inspect and ensure the filler hose (4) is fully seated on the fuel tank port and the fuel filler pipe (2).
Ensure the clamp (1) is properly located on the tank port between the bead (5) and the pipe (3).
Tighten: Tighten the fuel tank filler pipe hose clamp to 2.5 N.m (22 lb in).
Lower the vehicle.

Fig 3: Locating Fuel Filler Pipe Screws

Courtesy of GENERAL MOTORS CORP.

Install the fuel filler pipe screws to the fuel filler pipe access panel.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).
Add fuel and install the fuel fill cap.