LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2004 >> Regal LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls 3.8L (Introduction, Service & Replacement) >> Repair Instructions >> Mass Air Flow (MAF) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L36) or Fuel Injector Sight Shield Replacement (L67) in Engine Mechanical 3.8L.
    2. Fig 1: View Of MAF Sensor
    GM378168Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The mass air flow (MAF) sensor on this engine is attached to the throttle body assembly.
  2. Disconnect the MAF sensor electrical connector (8).
  3. Remove the MAF sensor screws (9).
  4. Remove the MAF sensor (1).
scientia non olet · About LEMON Manuals