LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2004 >> Regal LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls 3.8L (Introduction, Service & Replacement) >> Repair Instructions >> Throttle Position (TP) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the fuel injector sight shield. Refer toFuel Injector Sight Shield Replacement (L36)Fuel Injector Sight Shield Replacement (L67) in Engine Mechanical-3.8L.
    2. Fig 1: View Of TP Sensor & Connector
    GM178680Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the throttle position (TP) sensor electrical connector.
    3. Fig 2: Locating TP Sensor Screws
    GM178693Courtesy of GENERAL MOTORS CORP.
  3. Remove the two TP sensor screws.
    4. Fig 3: View Of TP Sensor
    GM178694Courtesy of GENERAL MOTORS CORP.
  4. Remove the TP sensor.
scientia non olet · About LEMON Manuals