LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Century Custom >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Accelerator Controls Pedal Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Accelerator Cable & Components
    GM12287Courtesy of GENERAL MOTORS CORP.
  1. Install the accelerator pedal (1) to the cowl (4).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the accelerator pedal bolt (3) and the stud (2).

    Tighten:  Tighten the bolt and the stud to 5 N.m (44 lb in).

  3. Install the accelerator cable (5) to the accelerator pedal (1).
    4. IMPORTANT: Inspect for complete throttle opening and closing positions by operating the accelerator pedal. Inspect for poor carpet fit under the accelerator pedal.
  4. Install the left instrument panel sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals