Installation Procedure
- Install the air cleaner housing by pushing the housing (1) into the 2 rubber grommets (2) in the engine compartment.
- Install the PCM and the harness into the air cleaner housing (3).
- Install the air cleaner housing cover assembly (1).
- Install the air cleaner housing screws (2).
Tighten: Tighten the screws to 3 N.m (27 lb in).
- Install the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
- Install the left inner fender brace. Refer to Brace Replacement - Front Fender Upper Diagonal in Body Front End.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.