LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Century Custom >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the left inner fender brace. Refer to Brace Replacement - Front Fender Upper Diagonal in Body Front End.
  2. Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
    3. Fig 1: View Of Air Cleaner Housing, Bolts, PCM & Harness
    GM444496Courtesy of GENERAL MOTORS CORP.
  3. Remove the air cleaner housing screws (2).
  4. Remove the air cleaner cover assembly (1).
  5. Without disconnecting the powertrain control module (PCM) connectors, remove the PCM and the harness from the air cleaner housing.
    6. Fig 2: Air Cleaner Housing
    GM444479Courtesy of GENERAL MOTORS CORP.
  6. Remove the air cleaner housing (1) by pulling the housing from the 2 rubber grommets (2) in the engine compartment.
  7. Inspect the air cleaner housing assembly for signs of damage and replace if necessary.
scientia non olet · About LEMON Manuals