LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Century Custom >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Fuel Pressure Regulator Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Fuel Return Pipe
    GM22507Courtesy of GENERAL MOTORS CORP.
  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
  2. Disconnect the fuel pressure regulator vacuum line.
  3. Remove the fuel return pipe from the fuel pressure regulator.
  4. Fig 2: Fuel Pressure Regulator & Screw
    GM21133Courtesy of GENERAL MOTORS CORP.
  5. Remove the fuel pressure regulator screw.
  6. Using a shop towel to catch any spilled fuel, lift and twist the fuel pressure regulator in order to remove the fuel pressure regulator from the fuel rail.
  7. Remove the retainer and the spacer bracket from the fuel rail and discard.
  8. Remove the fuel pressure regulator inlet and the fuel return pipe O-rings, discard the O-rings.
  9. Inspect the filter screen for contamination. If contaminated, replace the fuel pressure regulator.