LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Century Custom >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Introduction >> Repair Instructions >> Ignition Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the ignition control module to the bracket.
    2. Fig 1: View Of Spark Plug Wire Connections To Ignition Coils
    GM15977Courtesy of GENERAL MOTORS CORP.
  2. Install the coils to ignition control module.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the ignition coil screws.

    Tighten:  Tighten the screws to 4.5 N.m (40 lb in).

  4. Connect the spark plug wires as noted during removal.
  5. Connect the ignition control module electrical connectors.
scientia non olet · About LEMON Manuals