Engine Control Module (ECM)
- Current Gear
-
Displays current gear position of the transmission
- TCC Brake Switch
-
Displays ON or OFF status of the TCC Brake switch.
- Reverse Inhibit Solenoid Circuit Status
-
Displays OK, Incomplete, Short B+, Short Gnd, Open.
- Reverse Inhibit Solenoid Command
-
Displays Not Equipped/ON/OFF
- TR Sw. A/B/C/P
-
Displays LOW or HI for the state of each of the four inputs from the IMS. LOW displayed indicates a low voltage signal (0 volts) being monitored at the ECM. HI displayed indicates a high voltage signal (B+) being monitored at the ECM.