LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2009 >> Allure CXL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.8L - Introduction >> Repair Instructions >> Air Cleaner Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Installing Air Cleaner Housing
    GM444479Courtesy of GENERAL MOTORS CORP.
  1. Install the air cleaner housing by pushing the housing (1) into the 2 rubber grommets (2) in the engine compartment.
    2. Fig 2: View Of Air Cleaner Housing, Bolts, PCM & Harness
    GM444496Courtesy of GENERAL MOTORS CORP.
  2. Install the PCM and the harness into the air cleaner housing (3).
  3. Install the air cleaner housing cover assembly (1).
    4. CAUTION: Refer to Fastener Caution .
  4. Install the air cleaner housing screws (2).

    Tighten:  Tighten the screws to 3 N.m (27 lb in).

  5. Install the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .
  6. Install the left inner fender brace. Refer to Front Fender Upper Diagonal Brace Replacement  .
scientia non olet · About LEMON Manuals