LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2009 >> Allure Super >> Repair and Diagnosis >> Engine Performance >> System >> Data Communication System >> Diagnostic Information and Procedures >> Scan Tool Does Not Power Up >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition ON, test for battery voltage between the battery positive voltage circuit of the DLC and ground.
    • If less than battery voltage, test the voltage supply circuit for a short to ground or an open/high resistance.
  2. Test for less than 1.0 ohm between the ground circuit of the DLC and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance.
  3. If all tests normal, refer to the scan tool/CANdi module user guide.
scientia non olet · About LEMON Manuals