Removal Procedure

WARNING: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.

Fig 1: Crankshaft Position (CKP) Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Remove the right exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (LS4) .
Disconnect the crankshaft position (CKP) sensor electrical connector (1).

Fig 2: View Of CKP Sensor & Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Clean the area around the CKP before removal in order to avoid debris from entering the engine.

Remove the CKP sensor bolt.
Remove the CKP sensor.