LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2011 >> Lucerne Super >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 4.6L - Repair Instructions >> Repair Instructions >> Knock Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Electrical Connector
    GM1672557Courtesy of GENERAL MOTORS COMPANY
  1. Remove the intake manifold. Refer to Intake Manifold Replacement .
  2. Disconnect the electrical connector (3) from the right knock sensor, if required.
    3. Fig 2: Identifying CKP Sensor Wiring Harness Electrical Connector
    GM1672558Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the electrical connector (2) from the left knock sensor, if required.
    4. Fig 3: Identifying Knock Sensor
    GM1672563Courtesy of GENERAL MOTORS COMPANY
  4. Remove the appropriate knock sensor. Cylinder heads shown removed for clarity.
scientia non olet · About LEMON Manuals