Circuit/System Verification
- Verify that all tires have the proper air pressure.
- If not the proper air pressure
Adjust all tire air pressures to the stated cold air pressure as identified on the tire placard or specification.
- If the proper air pressure
- If not the proper air pressure
- Verify that all tires are of uniform size and matching brand.
- If not of uniform size or matching brand
- Replace the miss-sized or non-matching brand tire.
- Ignition ON.
- Verify the DTC does not set while operation the vehicle under the Conditions for Running the DTC.
- If the DTC sets, replace the K17 electronic brake control module.
- If the DTC does not set
- All OK.
- If all tires are of uniform size and matching brand
- All OK.