LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING:

Refer to Brake Fluid Irritant Warning .

CAUTION:

Refer to Brake Fluid Effects on Paint and Electrical Components Caution .

  1. Remove the electronic brake and traction control module with brake pressure modulator valve assembly. Refer to Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement .
    2. Fig 1: Electronic Brake Control Module (EBCM) And Bolts
    GM2330143Courtesy of GENERAL MOTORS COMPANY
  2. Remove the electronic brake control module (EBCM) bolts (1),
    3. Fig 2: EBCM And Brake Pressure Modulator Valve (BPMV)
    GM2330145Courtesy of GENERAL MOTORS COMPANY
  3. Carefully separate the EBCM (1) from the brake pressure modulator valve (BPMV).
    4. NOTE:

    Do not pry the components apart.

  4. Clean the sealing surfaces of the EBCM and the brake pressure modulator valve with denatured alcohol and allow to dry.
scientia non olet · About LEMON Manuals