Keyless Entry Control Module Replacement
WARNING: This page is about a different car, the 2013 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS COMPANY Keyless Entry Control Module Replacement
| Callout |
Component Name |
|
Preliminary Procedures
- Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
.
- Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement
.
|
| 1 |
Wiring Harness Bracket
Procedure
Release the wiring harness bracket. |
| 2 |
Keyless Entry Control Module Procedure
- Disconnect the wiring harness connectors.
- Clip out the fixing points from the keyless entry control module.
- Remove the keyless entry control module.
- After repairs, for programming and set up information. Refer to Control Module References
.
|