Installation Procedure
Courtesy of GENERAL MOTORS COMPANY
- Clip the 2 fuel pump flow control module clips (4) to the fuel pump flow control module bracket (3).
- Clip the fuel pump flow control module bracket clip (2) to the fuel pump flow control module (1).
Courtesy of GENERAL MOTORS COMPANY
- Plug the fuel pump flow control module wiring harness plug (2) to the fuel pump flow control module (1).
- Install the rear compartment side trim - right side. Refer to Rear Compartment Side Trim Replacement - Right Side
.
- If replacing the module, reprogram the module. Refer to Control Module References
.