Removal & Installation
WARNING: This page is about the Verano Premium, Automatic Trans, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 2.0L Eng,Turbocharger | Includes: R&I Bumper Cover. Includes: R&I Battery and Tray. Includes: Lowering Subframe. DOES NOT include wheel alignment. | 8.2 | C | |
| Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace: | ||||
| 2.0L Eng,Turbocharger, w/Clutch Removed | 0.2 | C | ||
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| 2.0L Eng,Turbocharger | 0.3 | C | ||
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: | ||||
| 2.0L Eng,Turbocharger, Actuator Assembly | 0.2 | C | ||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| 2.0L Eng,Turbocharger, Rear | 0.8 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 2.0L Eng,Turbocharger | 0.6 | C | ||
| Combination Procedure: OUTPUT SHAFT SEAL: Remove & Replace: | ||||
| 2.0L Eng,Turbocharger, Each | 0.2 | B | ||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| 2.0L Eng,Turbocharger | 0.4 | C | ||