Rear Object Sensor Wiring Harness Replacement

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Object Sensor Wiring Harness

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
1	Rear Object Sensor Wiring Harness Procedure Disconnect the rear object sensor wiring harness electrical connectors from the rear object sensors. Disconnect the rear object sensor wiring harness electrical connectors from the rear lamps. Using a suitable tool, disconnect the rear object sensor wiring harness from the rear fascia.

Callout

Component Name

Preliminary Procedures
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .

Rear Object Sensor Wiring Harness

Procedure

Disconnect the rear object sensor wiring harness electrical connectors from the rear object sensors.
Disconnect the rear object sensor wiring harness electrical connectors from the rear lamps.
Using a suitable tool, disconnect the rear object sensor wiring harness from the rear fascia.