LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2016 >> Envision >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING:

Refer to Brake Fluid Irritant Warning .

CAUTION:

Refer to Brake Fluid Effects on Paint and Electrical Components Caution .

CAUTION:

Always connect or disconnect the wiring harness connector from the EBCM/EBTCM with the ignition switch in the OFF position. Failure to observe this precaution could result in damage to the EBCM/EBTCM.

  1. Place the ignition switch in the OFF position.
    2. Fig 1: EBCM/BPMV and Bracket Assembly
    GM3876206Courtesy of GENERAL MOTORS COMPANY
  2. Remove the electronic brake control module (EBCM) with brake pressure modulator valve (BPMV) assembly (1). Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement 
    3. Fig 2: EBCM Bolts
    GM3876207Courtesy of GENERAL MOTORS COMPANY
  3. EBCM Bolts (1) - Remove
    4. Fig 3: EBCM
    GM3876208Courtesy of GENERAL MOTORS COMPANY
  4. EBCM (1) - Remove
scientia non olet · About LEMON Manuals