LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2016 >> Envision >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Control Solenoid Valve and Transmission Control Module Assembly Programming and Setup (6T50) >> TCM Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

TCM Reprogramming

    NOTE:
    • Use a scan tool to view and record the Transmission Control Module - End Model Part Number in the original TCM prior to starting the TCM reprogramming procedure.
    • In some cases, the TCM and ECM may have to be reprogrammed. When a selection for TCM Transmission Control Module - Programming is not available, select SEQ Programming Sequence ECM/TCM (Automatic Transmission Only).
  1. If the TCM needs to be reprogrammed. Refer to Service Programming System (SPS) .
  2. Perform the Transmission Adaptive Values Learn. Refer to Transmission Adaptive Values Learn .
    3. NOTE:

    After programming, perform the following to avoid future misdiagnosis:

  3. Turn the ignition OFF for 30 seconds.
  4. Turn the ignition ON with the engine OFF.
  5. Use the scan tool in order to retrieve history DTCs from all modules.
  6. Clear all history DTCs.
scientia non olet · About LEMON Manuals