Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
- Loosen the tie rod jam nut (1) enough to allow movement.
- Rotate the tie rod (2) in the direction necessary to the correct the toe measurement.
- Snug the jam nut, do not tighten at this time.
- Re-inspect the toe specifications and adjust as necessary.
- Hold the tie rod (2) and tighten jam nut (1) to: 75 (55 lb ft)
- Steering Wheel Angle Sensor Centering
NOTE:
Ensure the steering wheel is set in the straight ahead position.
CAUTION:
Refer to Fastener Caution .