| Includes: R&I Driveline Support Assembly; DOES NOT include Wheel Alignment.
Includes:Drain and refill Low Temperature Cooling System.
Includes: Drain and refill Transmission Fluid. | 11.2 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | | C |
| Combination Procedure: CONVERTER BUSHING & SEAL: Remove & Replace: |
| Torque Converter Fluid Seal | | 0.3 | | B |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.6 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: OUTPUT SHAFT SEAL: Remove & Replace: |
| Each | | 0.2 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| Includes: Programming. | 0.8 | | C |