Circuit/System Verification
- Ignition On/Vehicle In Service Mode
- Operate the component: Rear Defogger Switch Pressed
Verify the component turns On and Off: E18 Rear Defogger Grid
- If the component does not turn On and Off
Refer to: Circuit/System Testing
- If the component turns On and Off
- If the component does not turn On and Off
- Perform the scan tool control function: Illuminate All Indicators On and Off
Verify the component turns On and Off: Rear Defogger Indicator
- If the component does not turn On and Off
Replace the component: K33 HVAC Control Module
- If the component turns On and Off
- If the component does not turn On and Off
- All OK.