Installation Procedure
- Connect the electrical connectors.
- Reposition the instrument carrier to install the communication interface module bracket.
- Install Communication Interface Module Bracket (1)
- Install Communication Center Call Transceiver Bracket Bolt (1) and tighten 2.5 N.m (22 lb in)
- Install Communication Interface Module Bracket Bolt (1) and tighten 2.5 N.m (22 lb in)
- Install Instrument Panel Compartment Bolt (1) and tighten 2.5 N.m (22 lb in)
- Install Instrument Carrier Bolt (1) and tighten 2.5 N.m (22 lb in)
- Install Instrument Panel Knee Bolster Bolt (1) and tighten 2.5 N.m (22 lb in)
- Install Instrument Panel Lower Center Trim Plate Applique (1)Instrument Panel Lower Center Trim Plate Applique Replacement
- Install Front Floor Console Rear Air Duct-Front (2) Front Floor Console Rear Air Duct Replacement (Front)Front Floor Console Rear Air Duct Replacement (Rear)Front Floor Console Rear Air Duct Replacement (CJ4 Rear)
- Install Front Floor Console (3) Front Floor Console Replacement
CAUTION: