Circuit/System Verification

Verify there is no debris on the appropriate camera lens and that the bezel and bezel seal are not damaged.
- If debris is found on the lens
  Clean the lens. If the lens, bezel, or bezel seal are damaged, replace as necessary.
- If there is no debris on the lens
Engine running, transmission in R.
Verify the backup lamps are illuminated.
- If the backup lamps are not illuminated
  Refer to Backup Lamps Malfunction .
- If the backup lamps are illuminated
Engine running, transmission in R.
Verify a clear rear vision image is displayed on the A11 Radio.
- If a clear image is not displayed on only one camera
  Refer to Circuit/System Testing - Only one camera image distorted.
- If a clear image is not displayed for all cameras
  Refer to Circuit/System Testing - All camera images distorted with IO3 OR All camera images distorted with IO5 or IO6
- If a clear image is displayed
Engine running, transmission in D.
- If a clear image is not displayed on only one camera
  Refer to Circuit/System Testing - Only one camera image distorted.
- If a clear image is not displayed for all cameras
  Refer to Circuit/System Testing - All camera images distorted with IO3 OR All camera images distorted with IO5 or IO6
- If a clear image is displayed
All OK.