Keyless Entry Control Module Replacement

Fig 1: Keyless Entry Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove Quarter Lower Rear Trim Panel. Refer to Quarter Lower Rear Trim Panel Replacement
1	Keyless Entry Control Module Procedure Disconnect the electrical connector. Refer to Control Module References for programming and setup information, if required.

Callout

Component Name

Preliminary Procedure
Remove Quarter Lower Rear Trim Panel. Refer to Quarter Lower Rear Trim Panel Replacement

Keyless Entry Control Module

Procedure

Disconnect the electrical connector.
Refer to Control Module References for programming and setup information, if required.