LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2017 >> Envision Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install Front Wheel Speed Sensor
    2. Fig 1: Front Wheel Speed Sensor And Bolt
    GM3898434Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install Front Wheel Speed Sensor Bolt (1) and tighten to 6 N.m (53 lb in)
    3. Fig 2: Front Wheel Speed Sensor Grommet And Retainer
    GM3898133Courtesy of GENERAL MOTORS COMPANY
  3. Install Front Wheel Speed Sensor Grommet (1)
  4. Install Front Wheel Speed Sensor Retainer (2)
    5. Fig 3: Front Wheel Speed Sensor Retainers
    GM3898005Courtesy of GENERAL MOTORS COMPANY
  5. Install Front Wheel Speed Sensor Retainers (1) (Qty: 2)
    6. Fig 4: Front Wheel Speed Sensor Retainers
    GM3898003Courtesy of GENERAL MOTORS COMPANY
  6. Install Front Wheel Speed Sensor Retainers (1) (Qty: 2)
  7. Install Front Wheelhouse Liner. Refer to Front Wheelhouse Liner Replacement - Right Side , and/or Front Wheelhouse Liner Replacement - Left Side
  8. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
  9. Lower the vehicle.
    10. Fig 5: Front Wheel Speed Sensor Grommet
    GM3897984Courtesy of GENERAL MOTORS COMPANY
  10. Install Front Wheel Speed Sensor Grommet (1)
  11. Connect Front Wheel Speed Sensor Electrical Connector
  12. Install Air Inlet Grille Panel. Refer to Air Inlet Grille Panel Replacement
  13. Perform the diagnostic system check. Refer to Diagnostic System Check - Vehicle
scientia non olet · About LEMON Manuals