April 5, 2026: LEMON Manuals is launched! Read the announcement.

Theft Deterrent Module Replacement (With BTM)

Fig 1: Theft Deterrent Module & Fasteners (With BTM)

GM2206945

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedures

Remove the front floor console. Refer to Front Floor Console Replacement .
Remove the front floor console cup holder. Refer to Front Floor Console Cup Holder Replacement .

1

Theft Deterrent Module Fastener (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
1.5 N.m (13 lb in)

2

Theft Deterrent Module Assembly

Procedure

Disconnect the electrical connector.
Program the theft deterrent control module after replacement. Refer to Control Module References .