Installation Procedure

Seal (1) - Install
Electronic Brake Control Module (1) - Install
Fig 1: Electronic Brake Control Module Bolt Tightening Sequence
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

NOTE:
A new EBCM may not have threaded inserts. Refer to the Electronic Parts Catalog and use new self tapping fasteners to form the threads.

Electronic Brake Control Module Bolt (1) - Install and tighten in sequence [4x]
1. First Pass: 1.5 N.m (13 lb in)
2. Second Pass: 2.5 N.m (22 lb in)
3. Final Pass: 3.5 N.m (31 lb in)
Electronic Brake Control Module with Brake Pressure Modulator Valve - Install - Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement
Program the EBCM. Control Module References