LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2018 >> Enclave Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Programming And Setup - All Systems) >> Repair Instructions >> Remote Control Door Lock Receiver Programming and Setup >> Remote Control Door Lock Receiver Replacement - TPM Sensor Learn
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Control Door Lock Receiver Replacement - TPM Sensor Learn

WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

This procedure will learn TPM information to the new RCDLR by manually inputting the tire type using the scan tool and performing the TPM sensor learn. This procedure should be performed if the above Copy and Paste procedure can not be completed. An example of this would be an RCDLR that is unable to communicate with the scan tool and is required to be replaced.

  1. RCDLR Programming - Refer to Service Programming System (SPS) .
  2. Keyless Entry Transmitter Programming - Refer to Remote Control Door Lock Transmitter Learn .
  3. Tire Type Setup:
    1. Install a scan tool.
    2. Select Remote Control Door Lock Receiver under Module Setup in the Vehicle Control System menu.
    3. Select Tire Type/Pressure Selection.
    4. Follow the on-sceen instructions.
  4. Tire Pressure Monitoring Sensor Learn - Refer to Tire Pressure Indicator Sensor Learn .