Circuit/System Verification
- Ignition ON.
- Verify the instrument cluster Traction Control indicator turns On and Off when commanding the instrument cluster All Indicators On and Off with a scan tool.
- If the indicator does not turn On and Off
Replace the P16 Instrument Cluster.
- Go to next step: If the indicator turns On and Off
- If the indicator does not turn On and Off
- Verify the scan tool Traction Control Switch parameter changes between Active and Inactive while pressing and releasing the S75 Traction Control Switch.
- If the parameter does not change
Refer to Circuit/System Testing.
- Go to next step: If the parameter changes
- If the parameter does not change
- All OK.