Circuit/System Verification
- Verify DTC C0277 is not set in the K9 Body Control Module.
- If DTC is set
Refer to DTC C0277 or C0890 .
- Go to next step: If DTC is not set
- If DTC is set
- Ignition ON
- Verify the scan tool Body Control Module Brake Pedal Position Sensor Learned Released Position is YES.
- If the released position is not YES
Perform the Brake Pedal Position Sensor Learn. Refer to Brake Pedal Position Sensor Calibration .
- Go to next step: If the released position is YES
- If the released position is not YES
- Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC.
- If the DTC sets
Replace the K17 Electronic Brake Control Module.
- Go to next step: If the DTC does not set
- If the DTC sets
- All OK.