Removal Procedure
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
- Remove the battery tray. Battery Tray Replacement
- Without disconnecting the brake pipes, remove the electronic brake control module (EBCM) with the brake pressure modulator valve (BPMV) and bracket as an assembly. Brake Pressure Modulator Valve Replacement
- Carefully position aside the assembly and secure with heavy mechanics wire.
Remove the EBCM bolts (1),
- NOTE:
Do not pry the components apart.
Carefully separate the EBCM (1) from the BPMV.
- Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.