Installation Procedure

Rear Wheel Speed Sensor - Install
Courtesy of GENERAL MOTORS COMPANY

Rear Wheel Speed Sensor Electrical Connector (1) - Connect
Raise and secure the rear suspension cradle. Rear Suspension Cradle Replacement
Courtesy of GENERAL MOTORS COMPANY

Rear Wheel Speed Sensor Retainer (1) - Install [2x]
Courtesy of GENERAL MOTORS COMPANY

Rear Wheel Speed Sensor Retainer (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Rear Wheel Speed Sensor Bolt (1) - Install 6 N.m (53 lb in)
Install the tire and wheel assembly. Tire and Wheel Removal and Installation
Perform the diagnostic system check. Diagnostic System Check - Vehicle