Unsuccessful Programming Recovery

WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

In the event of an interrupted or unsuccessful programming event, perform the following steps:

Ignition ON. Ensure the K182 Parking Assist Control Module, DLC and programming tool connections are secure and the SPS software is up to date.
Verify the parking assist control module can be reprogrammed.
- If the K182 Parking Assist Control Module cannot be reprogrammed
1. Ignition OFF for one minute, ignition ON.
2. Verify the parking assist control module can be reprogrammed.
  - If the K182 Parking Assist Control Module cannot be reprogrammed, replace the parking assist control module.
  - Go to next step: If the K182 Parking Assist Control Module can be reprogrammed.
3. All OK.
- Go to next step: If the K182 Parking Assist Control Module can be reprogrammed
All OK.