LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2018 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Programming And Setup) >> Repair Instructions >> K19 Suspension Control Module: Programming and Setup >> Replace and Program Control Module or Reprogram Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Replace and Program Control Module or Reprogram Control Module

WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select K19 Suspension Control Module - Programming and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K19 Suspension Control Module - Setup or Configuration and follow the on-screen instructions.
  4. Clear DTCs.
  5. With a scan tool, perform the suspension system calibration procedure, if applicable.
scientia non olet · About LEMON Manuals