LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2018 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Programming And Setup) >> Repair Instructions >> K36 Inflatable Restraint Sensing and Diagnostic Module: Programming and Setup >> Programming an Existing or New Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming an Existing or New Control Module

WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

To program an existing or new control module, perform the following procedure:

  1. Ignition - On/Vehicle - In Service Mode
  2. Access SPS and follow the on-screen instructions for the control module: K36 Inflatable Restraint Sensing and Diagnostic Module
  3. Perform the SPS function: Programming and Setup
scientia non olet · About LEMON Manuals