LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2018 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Antilock Brake System) >> Repair Instructions >> Electronic Brake Control Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronic Brake Control Module Replacement

WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
GM4852718Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement , or Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement (LGX) 
1 Electronic Brake Control Module Bolt [4x]
Tighten 
3 N.m (27 lb in)
2 Electronic Brake Control Module

Procedure

  1. Separate the control module and modulator valve only in a clean environment.
  2. Run all necessary programming and setup procedures. Control Module References