Removal Procedure
WARNING:
Refer to Brake Dust Warning .
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
- Remove the rear wheelhouse panel liner. Refer to Rear Wheelhouse Liner Replacement .
Disconnect the wheel speed sensor electrical connector (1) and release the connector clip from the wheelhouse bracket.
- Release the wheel speed sensor harness clip (2) from the wheelhouse panel.
Release the wheel speed sensor harness clips (1) from the rear axle.
Remove the wheel speed sensor bolt (1).
Remove the wheel speed sensor (1) from the rear suspension knuckle.