Circuit/System Verification
- Ignition - On/Vehicle - In Service Mode
- Verify the scan tool parameter: Trunk Lid/Liftgate Window Exterior Unlatch Switch = Inactive
- If not the specified state
Refer to: Circuit/System Testing - Test 1
- Go to next step: If the specified state
- If not the specified state
- Operate the component: S46B Liftgate Unlatch Switch - Pressed
Verify the scan tool parameter: Trunk Lid/Liftgate Window Exterior Unlatch Switch = Active
- If not the specified state
Refer to: Circuit/System Testing - Test 1
- Go to next step: If the specified state
- If not the specified state
- Perform the scan tool control function: Liftgate Unlatch - Unlatch
Verify the component produces a clicking sound: M30 Liftgate Latch
- If the component does not produce a sound
Refer to: Circuit/System Testing - Test 2
- Go to next step: If the component produces a sound
- If the component does not produce a sound
- All OK.