Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Exhaust Front Pipe Gasket |
| Exhaust Manifold Gasket |
| Turbocharger Seal |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Exhaust Manifold Fastener | |
|
20N.m (15 lb ft) |
|
20N.m (15 lb ft) |
|
20N.m (15 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Brace Bracket Fastener | 22N.m (16 lb ft) |
| Catalytic Converter Heat Shield Fastener | 1.5N.m (13 lb in) |
| Exhaust Front Pipe Bracket Bolt | 22N.m (16 lb ft) |
| Exhaust Front Pipe Nut | 22N.m (16 lb ft) |
| Exhaust Manifold Brace Fastener | 25N.m (18 lb ft) |
| Exhaust Manifold Heat Shield Fastener | 14N.m (124 lb in) |
| Exhaust Muffler Shield Fastener | 1.5N.m (13 lb in) |
| Exhaust Pipe Hanger Bracket Nut | 9N.m (80 lb in) |
| Exhaust Rear Muffler Rear Hanger Fastener | 22N.m (16 lb ft) |
| Exhaust Rear Underbody Heat Shield Fastener | 1.5N.m (13 lb in) |
| Turbocharger Fastener | 22N.m (16 lb ft) |
| Turbocharger Stud | 10N.m (89 lb in) |