Side Obstacle Detection Control Module Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure
1	Side Object Sensing Alert Module Bolt [ 2x ] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb/in)
2	Side Object Sensing Alert Module [ 2x ] Procedure Disconnect the electrical connector. Slide the module out of the retaining bracket. Perform the necessary programming and setup procedure: Control Module References

Callout

Component Name

Preliminary Procedure

Side Object Sensing Alert Module Bolt [ 2x ]

CAUTION:

Tighten
2.5 N.m (22 lb/in)

Side Object Sensing Alert Module [ 2x ]

Procedure

Disconnect the electrical connector.
Slide the module out of the retaining bracket.
Perform the necessary programming and setup procedure: Control Module References