Unsuccessful Programming Recovery

In the event of an interrupted or unsuccessful configuration and setup event, perform the following steps:

1. Verify the control module, data link connector and programming tool connections are secure and the tool software is up to date.
2. Initiate Vehicle Sleep Mode
   • Ignition/Vehicle - Off
   • Close all doors
   • Remove Key
   • Wait for IPC to time out (up to 2 mins)
3. Ignition ON/Vehicle in Service Mode
4. Perform the SPS function: Configuration and Setup
   • If the configuration or setup is not successful - Replace the component: K85P Restraints Occupant Classification System Module - Passenger
   • Go to next step: If the programming is successful
5. All OK