Fuel Injector: Remove & Replace
WARNING: This page is about the Envision Avenir, AWD, which is a different variant/trim than selected.
FUEL INJECTION - GAS, PORT TYPE
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| All Four | Includes: R&I Intake Manifold. Includes: R&I Coolant Flow Control Valve. Includes: Drain and refill Cooling System. | 7.8 | B | |
| One | Includes: R&I Intake Manifold. Includes: R&I Coolant Flow Control Valve. Includes: Drain and refill Cooling System. | 7.6 | B | |
| Combination Procedure: FUEL INJECTOR BORE: Clean & Inspect: | ||||
| Each | 0.1 | B | ||
| Combination Procedure: THROTTLE BODY ASSEMBLY: Reset: | ||||
| Throttle Body Idle Air Flow Compensation Reset | Includes: Additional time for use of scan tool to perform this procedure. | 0.2 | B | |